Modern monitoring hardware can scan wide frequency ranges quickly, generating large volumes of measurement data. Spectrum monitoring software turns those measurements into a picture of how spectrum is being used, which signals may fall outside authorised conditions and what operators should investigate.
Spectrum monitoring software manages the full workflow of a spectrum monitoring operation, from controlling measurement hardware to visualising results, triggering alerts and producing reports. It brings data from fixed stations, mobile units, portable equipment and distributed sensor networks into a central interface. ATDI’s vendor-neutral platform integrates supported hardware from multiple manufacturers so teams can manage measurements across a mixed sensor network. ICS Monitoring SDRN Control
A monitoring network scans defined frequency ranges and streams measurements to the software for real-time display and comparison against configured rules. A new signal, an unexpected power level or an emission outside its authorised bandwidth can trigger an alert. Operators can review the recorded data, classify the signal, estimate its source location where the available measurements support it, and document their findings.
This workflow applies across regulatory enforcement, interference investigation, compliance monitoring and defence spectrum operations. Teams configure monitoring tasks and alarm rules to suit each application.
Spectrum monitoring can run continuously across defined frequency ranges, providing persistent visibility into spectrum activity. Scheduled campaigns repeat measurements at set intervals to build a record of occupancy over time. On-demand monitoring lets operators task available sensors to investigate a specific frequency or area in response to an interference report, complaint or operational requirement.
From a central interface, operators can assign tasks to fixed stations and mobile units, select frequency ranges and set measurement parameters remotely.
Spectrum occupancy analysis estimates how often a channel or band is detected as occupied during a measurement period. By comparing results across locations and times of day, regulators can assess usage patterns, operators can evaluate how their licensed frequencies are used, and planners can identify bands for further assessment before making new assignments.
A licence database records authorised use. Occupancy measurements show what sensors detect at the sampled locations and times. Comparing the two can reveal licensed channels with little observed activity, heavily occupied channels and recurring interference. Measurement coverage and detection thresholds help determine how representative the results are.
A spectrum trace plots measured signal power across a frequency range. A waterfall display stacks successive traces to show how activity changes over time. This can reveal frequency hopping, burst transmissions, intermittent interference and gradual frequency drift that a single trace may miss.
IQ recordings capture the in-phase and quadrature components of a signal within the selected recording bandwidth. These samples support detailed analysis and, where signal quality permits, demodulation and classification. When alarm-triggered recording is configured, operators can review the associated spectrum traces and IQ samples after the event.
Automated detection relies on rules that define which activity should trigger an alert. Reference masks set limits for a signal’s spectral profile. Power thresholds specify levels that trigger alerts at selected frequencies or across a band. Whitelists can suppress selected alerts for known signals, while blacklists can flag specified signals for investigation whenever they are detected.
These rules help teams monitor wide frequency ranges unattended and focus their investigations on flagged events. A threshold crossing or mask violation can trigger an alert and, where configured, capture the associated measurements. ATDI’s platform supports automated alerts against reference masks at specified frequencies and across defined bands. ICS Monitoring
Detection flags a signal or anomaly for review. Classification assesses the type of emission. Direction finding estimates the bearing to its source, while geolocation estimates the source position.
Operators can compare signal characteristics with known transmitter profiles to help classify an emission. A single observation provides a bearing to the source. Bearings from different positions can be combined to estimate the source location and display it on a terrain-referenced map. This helps regulators trace interference and defence teams locate emitters of operational interest. Direction finding software
National spectrum regulators use monitoring software to check emissions against licence conditions, investigate suspected unauthorised transmissions and retain measurement records that can support enforcement. Telecom operators use it to investigate interference affecting network performance, while critical infrastructure operators use it to monitor RF activity around sensitive sites. In defence, spectrum monitoring supports real-time awareness of the electromagnetic environment and can feed measurement data into communications intelligence (COMINT) and electronic warfare (EW) workflows. Spectrum monitoring
Comparing monitoring measurements with RF planning predictions helps engineers assess how closely the model reflects observed conditions. Differences can guide investigations into unexpected emissions or interference and help engineers refine propagation assumptions using field measurements. ATDI’s automated spectrum management suite brings together ICS Monitoring, ICS Manager and HTZ Communications, connecting monitoring data, licence records and engineering studies for civil spectrum authorities. Automated spectrum management suite




